Arlo is three, sometime during this month. We got him at the Golden Valley Humane Society, and he was found as a stray. So we don't know his real birthday.Glad you're our pup, buddy and sorry about the occasional mess....
Saturday, September 20, 2008
Happy Birthday Arlo
Arlo is three, sometime during this month. We got him at the Golden Valley Humane Society, and he was found as a stray. So we don't know his real birthday.Glad you're our pup, buddy and sorry about the occasional mess....
Window After Pictures
We had a bit of a camera dilemma so pictures were sparse for awhile, but I went back to the last two posts and added some pictures, so if you read them already, go back to see pictures of our yard and the window in progress.
Here's where we're at on the project that was supposed to take a few weeks back in May.
Living room:
Done!
Foyer still needs:
Shellac
Spring Bronze
Paint
Sash cord
Parting Bead
Hardware installed on sashes
Dining Room still needs:
Stripping
Sashes painted
Glazing to cure
And everything still needed on the foyer
To make us feel better, I am ending this post with after pictures of the living room window.
This is the screen that we bought at Bauer Bros. The paint was chipping and its mortise and tenon joint was pulling apart. I spent a lot of time fixing it up: stripping paint, gluing, etc. We bought new screen and I tacked it in with galvanized nails, which I think looks pretty sweet. You can see them in the detail shot below. You can also see the house is in great need of a paint job.
These are of the actual window. This is the same window, one picture had flash, the other didn't. I would say the brighter one is a little more realistic in color. Like I said, we used stain and spar varnish on the sashes. On the interior trim, we used garnet shellac. I think it turned out beautifully, but we both agreed that for the other windows, we're going to cheat and stain first, rather than try to use shellac to match the finish. It took a ton of coats, and shellac dries so quickly it's a pain to work with. I like the wood, white trim and blue screen. It looks very nautical to me.
Finally, this is the hardware. I have a confession to make. I followed the advice of many online and boiled off the old paint on my hardware. We were confronted with pretty dull hardware that had a copper color to it, when it still had the finish on. Otherwise it was just raw steel. They are pitted, and are in need of a replating that is not in the realm of What-Sarah-and-Kevin-can-afford. So...I used Rub n' Buff. I coated it in clear spray on shellac. The other options: to try and find matching replacements at a salvage shop or to buy new at Home Depot were not appealing. First off, my tube of Rub n' Buff (in Autumn Gold, you can find it at your local arts and crafts store, come on, you know you want to...) was a couple of bucks. New hardware, or new-old hardware, would have been way more than that. Also, The new stuff looked so cheap, and even the quality at the salvage places didn't seem to match what we had. I think I chose right, do you?
I would like to find the oil-rubbed bronze Rub N' Buff color and put it over the coppery color I have on now, because it seems like that was the original finish on most stuff.
Here's where we're at on the project that was supposed to take a few weeks back in May.
Living room:
Done!
Foyer still needs:
Shellac
Spring Bronze
Paint
Sash cord
Parting Bead
Hardware installed on sashes
Dining Room still needs:
Stripping
Sashes painted
Glazing to cure
And everything still needed on the foyer
To make us feel better, I am ending this post with after pictures of the living room window.
This is the screen that we bought at Bauer Bros. The paint was chipping and its mortise and tenon joint was pulling apart. I spent a lot of time fixing it up: stripping paint, gluing, etc. We bought new screen and I tacked it in with galvanized nails, which I think looks pretty sweet. You can see them in the detail shot below. You can also see the house is in great need of a paint job.
These are of the actual window. This is the same window, one picture had flash, the other didn't. I would say the brighter one is a little more realistic in color. Like I said, we used stain and spar varnish on the sashes. On the interior trim, we used garnet shellac. I think it turned out beautifully, but we both agreed that for the other windows, we're going to cheat and stain first, rather than try to use shellac to match the finish. It took a ton of coats, and shellac dries so quickly it's a pain to work with. I like the wood, white trim and blue screen. It looks very nautical to me.
Finally, this is the hardware. I have a confession to make. I followed the advice of many online and boiled off the old paint on my hardware. We were confronted with pretty dull hardware that had a copper color to it, when it still had the finish on. Otherwise it was just raw steel. They are pitted, and are in need of a replating that is not in the realm of What-Sarah-and-Kevin-can-afford. So...I used Rub n' Buff. I coated it in clear spray on shellac. The other options: to try and find matching replacements at a salvage shop or to buy new at Home Depot were not appealing. First off, my tube of Rub n' Buff (in Autumn Gold, you can find it at your local arts and crafts store, come on, you know you want to...) was a couple of bucks. New hardware, or new-old hardware, would have been way more than that. Also, The new stuff looked so cheap, and even the quality at the salvage places didn't seem to match what we had. I think I chose right, do you?
I would like to find the oil-rubbed bronze Rub N' Buff color and put it over the coppery color I have on now, because it seems like that was the original finish on most stuff.
Subscribe to:
Comments (Atom)
